EP chemistries, tackifiers, solid lubricants, corrosion inhibitors and antioxidants — calibrated for lithium, lithium-complex, calcium sulfonate, polyurea, aluminium-complex and bentone thickener systems across all NLGI grades.
Pick a subcategory to drill down to individual products with treat rates, recommended viscosity grades and downloadable PDS / MSDS.
4 products
4 products
4 products
8 products
2 products
4 products
4 products
A curated selection — the most-asked-for product codes in each grease additives subcategory. Click any code to view full specifications.
ZDDP B grease AW
For: NLGI 1–3
View product → LGA 7202GAshless AW grease
For: NLGI 1, 2
View product → LGA 7203GTCP AW grease
For: NLGI 2
View product → LGA 7204GPolymer-stabilised AW
For: NLGI 2, 3
View product →Phenolic AO grease
For: NLGI 1–3
View product → LGA 7206GAminic AO grease
For: NLGI 1, 2
View product → LGA 7207GSynergistic AO blend
For: NLGI 2
View product → LGA 7208GSulfurised AO
For: NLGI 2
View product →CaS CI grease
For: NLGI 1, 2
View product → LGA 55562NaS CI grease
For: NLGI 1, 2
View product → LGA 55563Amine phosphate CI
For: NLGI 2
View product → LGA 55564Imidazoline CI
For: NLGI 2
View product →S-P EP booster grease
For: NLGI 1, 2, 3
View product → LGA 343GHD EP for lithium complex
For: NLGI 1, 2
View product → LGA 538ZDDP grease booster
For: NLGI 2
View product → LGA 552CaS complex EP booster
For: NLGI 2
View product →MoS2 powder
For: NLGI 2
View product → LGA 7198GGraphite powder
For: NLGI 0–2
View product → LGA 7199Gh-BN white solid
For: NLGI 2
View product → LGA 7200GPTFE solid
For: NLGI 1, 2
View product →PIB 1000 tackifier
For: NLGI 0–3
View product → LGA 152PIB 2400 tackifier
For: NLGI 1–3
View product → LGA 153High-MW tackifier
For: NLGI 1, 2
View product → LGA 154Polyacrylate tackifier
For: NLGI 1, 2
View product →A finished grease is a thickener + base oil + additive system. The thickener controls consistency (NLGI) and drop point. The base oil decides film thickness and temperature range. But the additives decide whether the grease survives the application: EP chemistry handles shock loads, tackifiers keep the grease in place under vibration and water washout, solids (MoS2, graphite, h-BN) handle slow-speed boundary contact, and corrosion inhibitors protect bearings in humid or chloride-exposed service.
We supply each family individually and as pre-blended grease additive packages calibrated for common thickener chemistries — lithium 12-OH, lithium complex, calcium sulfonate, polyurea, aluminium complex, and bentonite-thickened.
| Parameter | Li EP2 (general) | Li-Complex EP2 (HT) | CaSX NLGI 2 (CV joint) |
|---|---|---|---|
| 4-ball weld load (kg) | ≥ 250 | ≥ 315 | ≥ 400 |
| 4-ball wear scar (mm, 40 kg, 1h) | ≤ 0.55 | ≤ 0.5 | ≤ 0.45 |
| Drop point (°C) | ≥ 180 | ≥ 260 | ≥ 280 |
| Water washout (% loss, ASTM D1264) | ≤ 8 | ≤ 8 | ≤ 2 |
| Rust test (ASTM D1743) | Pass | Pass | Pass |
| Additive treat rate (% wt) | 1.5 – 2.5 | 2.0 – 3.5 | 2.0 – 4.0 |
Our formulation team responds within 4 business hours with a treat-rate recommendation and a country-specific quote.
